Glider Airplane
To launch this plane, hold it up high and level and just let it go. It will drift slowly to the ground. If you give it a harder push, it may flip over and come flying back toward you.

Step 1:
Fold in half the long way. 
Step 2:
Unfold and lay flat. Fold the corners of one end in toward the center to meet at the middle crease.
Step 3:
Fold this triangular part over and back, toward the middle of the paper.
Step 4:
Fold the tip of the triangle back toward the front so it touches the folded edge.
Step 5:
Fold one side in toward the middle so the folded edge aligns with the center crease, covering the folded-up tip.

Repeat on the other side.

Step 6:
Unfold these creases and fold the sides inward again, so the sides just meet the edges of the folded-back triangle tip.

Step 7:
Unfold the sides again, then refold, tucking the edges behind the triangle.

Fold over again and crease firmly. Turn over and repeat this on the other side.

Step 8:
Turn over and fold the sides of the wings upward about an inch in from the edge. This is not really a fold so much as it is making a bend or dip in the wing.

Step 9:
Fold the back corners of the wings up and inward a little bit. The corners should stand up straight.

Step 10:
Hold the plane on the underside as shown and keep it level as you release it.


NetFlix is a registered trademark of Netflix, Inc 
This site is in no way affiliated with or endorsed by NetFlix, Inc.
Content copyright 2008